Victron Blue Smart IP67 Waterproof Battery Charger
The Victron Blue Smart IP67 Charger is a fully encapsulated, waterproof battery charger for 12V and 24V lead-acid and Li-ion batteries. The series covers seven models from 5A to 25A charge current, each available with a 230Vac or 120Vac input. The cast aluminium enclosure is rated IP67 and the electronics are moulded in resin, so water, oil and ...
Read MoreThe Victron Blue Smart IP67 Charger is a fully encapsulated, waterproof battery charger for 12V and 24V lead-acid and Li-ion batteries. The series covers seven models from 5A to 25A charge current, each available with a 230Vac or 120Vac input.
The cast aluminium enclosure is rated IP67 and the electronics are moulded in resin, so water, oil and dirt will not damage the charger. It is also shockproof and ignition protected, which suits installations on vehicles and in exposed locations.
A microprocessor-controlled 5-stage adaptive algorithm (bulk, absorption, recondition, float and storage) adjusts the charging process to how the battery is actually used. Normal, High and Li-ion settings match the charge voltages to the battery, and a LOW mode reduces charge current on every model. Built-in Bluetooth lets you monitor voltage and current, change settings and update the charger wirelessly.
For batteries that sit idle, storage mode lowers the float voltage after 24 hours without discharge and raises it to absorption level once a week, reducing gassing, plate corrosion, electrolyte stratification and sulphation. The charger will also start on a battery discharged to zero volts and reconnect to a Li-ion battery that has opened its internal disconnect.
Efficiency of 93% to 96% means less wasted heat, and no-load power consumption is 0.5W. In hot locations such as machine rooms, the Victron Blue Smart IP67 delivers full rated output up to 40°C, then reduces output current as temperature rises to 60°C instead of failing. Every model is protected against battery reverse polarity, output short circuit and over-temperature, and can also run as a DC power supply.
Typical applications include vehicles, standby and backup battery banks, and battery maintenance in plant and machine rooms.
For help choosing a Victron Blue Smart IP67 model for your battery bank, contact Powerbox Australia's engineering team. You can also browse our battery charger range, the Victron Blue Smart IP65 charger and the complete Victron Energy range.
Show LessFeatures
- Waterproof, Shockproof and Ignition Protected: Fully encapsulated cast aluminium enclosure rated IP67, with electronics moulded in resin so water, oil and dirt cannot damage the charger.
- Bluetooth Smart Built In: Monitor voltage and current, change settings and update the charger wirelessly as new features become available.
- High Efficiency: 93% to 96% efficiency means less energy wasted as heat, and power consumption drops to 0.5W once the battery is fully charged.
- 5-Stage Adaptive Charge Algorithm: Bulk, absorption, recondition, float and storage stages automatically adapt to how the battery is used.
- Charges Lead-Acid and Li-ion Batteries: Li-ion batteries are charged with a bulk, absorption and float algorithm, and the charger reconnects to a fully discharged Li-ion battery with an internal disconnect function.
- Storage Mode: Lowers float voltage after 24 hours without discharge to minimise gassing and corrosion, then raises it to absorption level once a week to prevent electrolyte stratification and sulphation.
- Fully Discharged Battery Recovery: Will initiate charging even from a battery discharged to zero volts.
- Normal, High and Li-ion Charge Settings: Absorption, float and storage voltages to suit the battery type, plus a LOW charge current mode on every model.
- Can Be Used as a Power Supply: Operates as a DC power supply as well as a battery charger.
- Protected Against Overheating: Full rated output up to 40°C, then output current reduces as temperature rises to 60°C instead of the charger failing.
- Two Status LEDs: Yellow LED shows bulk, absorption, float or storage stage; green LED shows power on.
Specifications
| Blue Smart IP67 Charger | |||||||
|---|---|---|---|---|---|---|---|
| Model | 12/7 | 12/13 | 12/17 | 12/25 | 24/5 | 24/8 | 24/12 |
| Nominal voltage range and frequency, 230Vac models | 220–240Vac 50–60Hz | ||||||
| Input voltage range and frequency, 230Vac models | 180–265Vac 45–65Hz | ||||||
| Input voltage range and frequency, 120Vac models | 100–135Vac 45–65Hz | ||||||
| Efficiency | 93% | 95% | 94% | 96% | |||
| No load power consumption | 0.5W | ||||||
| Charge voltage 'absorption' | Normal: 14.4V, High: 14.7V, Li-ion: 14.2V | Normal: 28.8V, High: 29.4V, Li-ion: 28.4V | |||||
| Charge voltage 'float' | Normal: 13.8V, High: 13.8V, Li-ion: 13.5V | Normal: 27.6V, High: 27.6V, Li-ion: 27.0V | |||||
| Charge voltage 'storage' | Normal: 13.2V, High: 13.2V, Li-ion: 13.5V | Normal: 26.4V, High: 26.4V, Li-ion: 27.0V | |||||
| Charge current, normal mode | 7A | 13A | 17A | 25A | 5A | 8A | 12A |
| Charge current, LOW | 2A | 4A | 6A | 10A | 2A | 3A | 4A |
| Charge algorithm | 5-stage adaptive | ||||||
| Can be used as power supply | Yes | ||||||
| Protection | Battery reverse polarity (fuse), Output short circuit, Over temperature | ||||||
| Operating temp. range, 230Vac models | -20°C to +60°C (full rated output up to 40°C). Derate 3% per °C above 40°C | ||||||
| Operating temp. range, 120Vac models | -30°C/-22°F to +60°C/140°F (full rated output up to 40°C/100°F). Derate 3% per °C above 40°C | ||||||
| Humidity | Up to 100% | ||||||
| Start interrupt option, 230Vac (12/25(1+si) and 24/12(1+si) models only) | Short circuit proof, current limit 0.5A. Output voltage: max one volt lower than main output | ||||||
| ENCLOSURE | |||||||
|---|---|---|---|---|---|---|---|
| Model | 12/7 | 12/13 | 12/17 | 12/25 | 24/5 | 24/8 | 24/12 |
| Material & Colour | aluminium (blue RAL 5012) | ||||||
| Battery-connection | Black and red 1.5m (5ft) cable | ||||||
| 230Vac-connection | 1.5m cable with CEE 7/7 plug | ||||||
| 120Vac-connection | 1.5m (5ft) cable with NEMA 5-15 plug | ||||||
| Protection category | IP67 | ||||||
| Weight (kg/lbs) | 1.8/4.0 | 2.4/5.3 | 1.8/4.0 | 2.4/5.3 | |||
| Dimensions (h x w x d in mm) | 85 x 211 x 60 | 99 x 219 x 65 | 85 x 211 x 60 | 99 x 219 x 65 | |||
| Dimensions (h x w x d in inch) | 3.4 x 8.3 x 2.4 | 3.9 x 8.6 x 2.6 | 3.4 x 8.3 x 2.4 | 3.9 x 8.6 x 2.6 | |||
| STANDARDS | |||||||
|---|---|---|---|---|---|---|---|
| Model | 12/7 | 12/13 | 12/17 | 12/25 | 24/5 | 24/8 | 24/12 |
| Safety, 230Vac models | EN 60335-1, EN 60335-2-29 | ||||||
| Safety, 120Vac models | UL 1236, CSA C22.2, EN 60335-1, EN 60335-2-29 | ||||||
| Emission Immunity | EN 55014-1, EN 61000-6-3, EN 61000-3-2 | ||||||
| Automotive Directive | EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 | ||||||
Selection Table
| MODEL DESCRIPTION | BATTERY VOLTAGE | CHARGE CURRENT | INPUT VOLTAGE RANGE |
|---|---|---|---|
| Blue Smart IP67 Charger 12/7 (230Vac) | 12V | 7A | 180–265Vac |
| Blue Smart IP67 Charger 12/13 (230Vac) | 12V | 13A | 180–265Vac |
| Blue Smart IP67 Charger 12/17 (230Vac) | 12V | 17A | 180–265Vac |
| Blue Smart IP67 Charger 12/25 (230Vac) | 12V | 25A | 180–265Vac |
| Blue Smart IP67 Charger 24/5 (230Vac) | 24V | 5A | 180–265Vac |
| Blue Smart IP67 Charger 24/8 (230Vac) | 24V | 8A | 180–265Vac |
| Blue Smart IP67 Charger 24/12 (230Vac) | 24V | 12A | 180–265Vac |
| Blue Smart IP67 Charger 12/7 (120Vac) | 12V | 7A | 100–135Vac |
| Blue Smart IP67 Charger 12/13 (120Vac) | 12V | 13A | 100–135Vac |
| Blue Smart IP67 Charger 12/17 (120Vac) | 12V | 17A | 100–135Vac |
| Blue Smart IP67 Charger 12/25 (120Vac) | 12V | 25A | 100–135Vac |
| Blue Smart IP67 Charger 24/5 (120Vac) | 24V | 5A | 100–135Vac |
| Blue Smart IP67 Charger 24/8 (120Vac) | 24V | 8A | 100–135Vac |
| Blue Smart IP67 Charger 24/12 (120Vac) | 24V | 12A | 100–135Vac |
Warranty & Returns
Warranty periods vary by product. Please refer to the Powerbox Warranty Policy for the applicable coverage period against manufacturing defects from date of purchase. For returns and RMA requests, please visit our RMA support page or contact our support team directly.











