Site Management and Remote Monitoring

Victron Smart Battery Sense

The Victron Smart Battery Sense is a wireless battery voltage and temperature sensor that lets Victron MPPT solar chargers charge to the battery's real conditions rather than what the charger sees at its own terminals. It measures voltage directly at the battery posts, removing errors caused by voltage drop along the charge cables, and reports b...

Read More

The Victron Smart Battery Sense is a wireless battery voltage and temperature sensor that lets Victron MPPT solar chargers charge to the battery's real conditions rather than what the charger sees at its own terminals. It measures voltage directly at the battery posts, removing errors caused by voltage drop along the charge cables, and reports battery temperature so the charge voltage suits the conditions.

For lead-acid batteries, the temperature reading drives temperature compensation: the charger raises the charge voltage when the battery is cold and lowers it when the battery is hot. For lithium batteries, it enables a low-temperature charge cut-off, stopping charging before the cells reach temperatures near or below freezing, where charging causes permanent damage.

Smart Battery Sense shares its readings over VE.Smart Networking, Victron's wireless network based on Bluetooth Smart, so no data cabling is needed between the battery and the chargers. One sensor can serve several solar chargers connected to the same 12V, 24V or 48V battery bank. It works with Bluetooth-enabled VE.Direct MPPT solar chargers and the Victron Smart IP43 Charger, and the network is set up in the VictronConnect app. It is not needed in systems already controlled by a Color Control GX or Venus GX, or where a BMV-712 Smart battery monitor with its temperature sensor is already fitted.

Installation takes minutes. Connect the two pre-crimped M10 eyelets to the battery terminals and fix the unit to the battery case with its self-adhesive strip; an inline fuse protects the sensing leads. Two versions are available, differing in wireless range: the standard model (SBS050100200) reaches up to 3m, and the long-range model (SBS050150200) reaches up to 10m, which suits battery banks installed further from the solar charger.

Smart Battery Sense pairs with the Victron SmartSolar MPPT 100/30 and 100/50 solar charge controllers, the SmartSolar MPPT 75/10 to 100/20 solar charge controllers and the Victron Smart IP43 battery charger.

Show Less

Model:
Unit Price
—
or send a quick enquiry about this product only
Features
  • Voltage Sensing at the Battery: Measures voltage at the battery terminals, so the charger corrects for voltage drop in the charge cables and applies the correct charge voltage.
  • Temperature Compensation for Lead-Acid: Battery temperature data lets the charger raise the charge voltage for a cold battery and lower it for a hot one.
  • Low-Temperature Charge Cut-Off for Lithium: Charging is disabled when the battery is too cold, protecting lithium cells from permanent damage caused by charging near or below freezing.
  • Wireless VE.Smart Networking: Shares voltage and temperature data with compatible chargers over VE.Smart Networking, Victron's Bluetooth Smart-based network, with no data cabling.
  • One Sensor, Multiple Chargers: A single sensor can serve several solar chargers connected to the same 12V, 24V or 48V battery bank.
  • Compatible Chargers: Works with Bluetooth-enabled VE.Direct MPPT solar chargers and the Victron Smart IP43 Charger.
  • Two Range Options: Standard model (SBS050100200) with up to 3m wireless range, or long-range model (SBS050150200) with up to 10m.
  • Wide Operating Voltage: 8–60Vdc operating range (65Vdc absolute maximum) covers 12V, 24V and 48V battery systems.
  • Low Power Consumption: Draws 0.2–0.3mA when not connected and 0.6–1.6mA when connected to the VE.Smart network, depending on battery voltage.
  • Stored Trends: Records battery voltage and temperature, with around 181 days of stored trend data viewable in the VictronConnect app.
  • Quick Installation: Pre-crimped M10 eyelets, an inline T1A fuse and a self-adhesive backing for mounting directly on the battery.
  • Compact Design: 14 × 38 × 38mm (h × w × d) with a 45cm sensing cable.
  • Status LEDs: A blue Bluetooth LED and a red error LED show connection, measurement and firmware update states.
  • Firmware Updates: Firmware is updated through the VictronConnect app when required.
Specifications
GENERAL
Model SBS050100200 SBS050150200
Model Smart Battery Sense (standard) Smart Battery Sense long range
Wireless range Up to 3m Up to 10m
Measurement Battery voltage and temperature
Wireless communication VE.Smart Networking (Bluetooth Smart)
Supported products Bluetooth-enabled VE.Direct MPPT solar chargers, Smart IP43 Charger
Battery system voltage 12V, 24V and 48V
Configuration VictronConnect app
Stored trends Battery voltage and temperature, approx. 181 days
Temperature on VRM No
ELECTRICAL
Model SBS050100200 SBS050150200
Operating voltage range 8–60Vdc
Absolute maximum voltage 65Vdc
Fuse rating T1A 250V
Bluetooth frequency 2402–2480MHz
Bluetooth power –4dBm
POWER CONSUMPTION
Model SBS050100200 SBS050150200
12V battery 0.3mA not connected; 0.5mA joining VE.Smart network; 1.6mA connected
24V battery 0.2mA not connected; 0.3mA joining VE.Smart network; 0.9mA connected
48V battery 0.2mA not connected; 0.3mA joining VE.Smart network; 0.6mA connected
ENVIRONMENTAL
Model SBS050100200 SBS050150200
Operating temperature range –10°C to +60°C
MECHANICAL
Model SBS050100200 SBS050150200
Dimensions (h × w × d) 14 × 38 × 38mm
Cable length 45cm
Eyelet hole size 10mm (M10)
Mounting Self-adhesive strip, directly on the battery
Status indicators Blue Bluetooth LED, red error LED
Selection Table
Model SBS050100200 SBS050150200
Description Standard range Long range
Wireless range Up to 3m Up to 10m
Operating voltage range 8–60Vdc
Battery system voltage 12V, 24V and 48V
Downloads
Victron-Smart_Battery_Sense_Manual.pdf
Warranty & Returns

Warranty periods vary by product. Please refer to the Powerbox Warranty Policy for the applicable coverage period against manufacturing defects from date of purchase. For returns and RMA requests, please visit our RMA support page or contact our support team directly.