Site Management and Remote Monitoring

Victron SmartShunt Battery Monitor

The Victron SmartShunt is a battery monitor without a display. It measures battery voltage and current, then shows state of charge, time to go, consumed amp hours and history in the VictronConnect app, so your phone or tablet becomes the display over Bluetooth.With no separate display head to mount and wire, the SmartShunt suits systems that nee...

Read More

The Victron SmartShunt is a battery monitor without a display. It measures battery voltage and current, then shows state of charge, time to go, consumed amp hours and history in the VictronConnect app, so your phone or tablet becomes the display over Bluetooth.

With no separate display head to mount and wire, the SmartShunt suits systems that need accurate battery monitoring with less wiring and clutter. It is a practical alternative to a BMV battery monitor, with two differences: it has no programmable visual and audible alarm, and no programmable relay.

The shunt connects between the battery and the system's loads and chargers. Two cables with 1A fuses are supplied, one for the positive connection and one for the auxiliary input. The auxiliary input monitors a second battery, such as a starter battery charged by an engine alternator, measures battery bank midpoint voltage, or reads battery temperature through the optional temperature sensor (ASS000100000).

For system-level monitoring, the VE.Direct port connects the SmartShunt to a GX device, bringing battery data into the wider Victron system. The SmartShunt also stores 46 days of trend data for battery voltage, current, state of charge and the auxiliary input.

The series comes in two versions, each in 300A, 500A, 1000A and 2000A ratings. The standard SmartShunt is rated IP21 for dry installations. The SmartShunt IP65 is water resistant, with 1.5m fused cables and a 1.5m cable fitted with a VE.Direct socket, and shows its alarms in VictronConnect or on a GX device. Both versions use the same measurement electronics and are powered from 6.5–70Vdc.

The SmartShunt suits battery banks from 1 to 9,999Ah, including house and starter battery systems in vehicles and boats. Bluetooth range is typically 10–15m; where a vehicle chassis or seawater reduces it further, a VE.Direct Bluetooth Smart dongle (ASS030536011) can be fitted and the SmartShunt's own Bluetooth switched off.

Connect the SmartShunt to a Victron Cerbo GX system monitor for central system monitoring, or choose the Victron BMV-712 Smart battery monitor where a display, alarm and programmable relay are needed.

Show Less

Model:
Unit Price
—
or send a quick enquiry about this product only
Features
  • Bluetooth Monitoring: Connects to the VictronConnect app, so a phone or tablet acts as the display for state of charge, time to go, consumed amp hours and history.
  • No Display Head to Install: Battery monitoring with less wiring and clutter than a monitor with a separate display.
  • VE.Direct Port: Wired connection to a GX device for system-level monitoring.
  • Auxiliary Input: Monitors a second battery (such as a starter battery), battery bank midpoint voltage, or battery temperature with the optional sensor (ASS000100000).
  • Wide Supply Range: 6.5–70Vdc supply voltage and auxiliary battery input range.
  • Low Current Draw: Less than 1mA.
  • Battery Capacity Range: Programmable for battery banks from 1 to 9,999Ah.
  • Measurement Accuracy: ±0.4% current measurement and ±0.3% voltage measurement accuracy, with ±0.01A current and ±0.01V voltage resolution.
  • Stored Trends: 46 days of battery voltage, current, state of charge and auxiliary input data.
  • Two Versions, Four Ratings: Standard IP21 and water-resistant IP65 versions, each in 300A, 500A, 1000A and 2000A ratings.
  • IP65 Version: Water resistant, with two 1.5m fused cables and a 1.5m cable fitted with a VE.Direct socket (a VE.Direct cable to a GX device is ordered separately).
  • Wide Operating Temperature: -40°C to +50°C.
  • Fused Cables Included: Two cables with 1A fuses for the positive connection and the starter battery or midpoint connection.
  • Shunt Connection Bolts: M8 on 300A models and M10 on 500A, 1000A and 2000A models.
  • Extended Bluetooth Range Option: Where metal or seawater limits the typical 10–15m range, a VE.Direct Bluetooth Smart dongle (ASS030536011) can be used instead of the built-in Bluetooth.
Specifications
GENERAL
Model SmartShunt 300A SmartShunt 500A SmartShunt 1000A SmartShunt 2000A SmartShunt IP65 300A SmartShunt IP65 500A SmartShunt IP65 1000A SmartShunt IP65 2000A
Supply voltage range 6.5–70Vdc
Current draw <1mA
Input voltage range, auxiliary battery 6.5–70Vdc
Battery capacity 1–9,999Ah
Operating temperature range -40°C to +50°C (-40°F to +120°F)
Measures voltage of second battery, or temperature, or midpoint Yes
Temperature measurement range -20°C to +50°C
VE.Direct communication port Yes
Alarms No programmable visual and audible alarm Alarms shown in VictronConnect or on a GX device
Programmable relay No
RESOLUTION & ACCURACY
Model SmartShunt 300A SmartShunt 500A SmartShunt 1000A SmartShunt 2000A SmartShunt IP65 300A SmartShunt IP65 500A SmartShunt IP65 1000A SmartShunt IP65 2000A
Current ±0.01A
Voltage ±0.01V
Amp hours ±0.1Ah
State of charge (0–100%) ±0.1%
Time to go ±1min
Temperature (with optional temperature sensor) ±1°C/°F (0–50°C or 30–120°F)
Accuracy of current measurement ±0.4%
Offset <10mA <10mA <20mA <40mA <10mA <10mA <20mA <40mA
Accuracy of voltage measurement ±0.3%
INSTALLATION & DIMENSIONS
Model SmartShunt 300A SmartShunt 500A SmartShunt 1000A SmartShunt 2000A SmartShunt IP65 300A SmartShunt IP65 500A SmartShunt IP65 1000A SmartShunt IP65 2000A
Dimensions (h × w × d) 44 × 120 × 44mm 46 × 120 × 54mm 68 × 168 × 75mm 68 × 168 × 100mm 44 × 120 × 38mm 46 × 120 × 54mm 68 × 168 × 75mm 68 × 168 × 100mm
Shunt connection bolts M8 M10 M10 M10 M8 M10 M10 M10
Protection category IP21 IP65
STANDARDS
Model SmartShunt 300A SmartShunt 500A SmartShunt 1000A SmartShunt 2000A SmartShunt IP65 300A SmartShunt IP65 500A SmartShunt IP65 1000A SmartShunt IP65 2000A
Safety EN 60335-1
Emission / immunity EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3
Automotive EN 50498
ACCESSORIES
Model SmartShunt 300A SmartShunt 500A SmartShunt 1000A SmartShunt 2000A SmartShunt IP65 300A SmartShunt IP65 500A SmartShunt IP65 1000A SmartShunt IP65 2000A
Cables Two cables with 1A fuse, for ‘+’ connection and starter battery or midpoint connection (included) Two 1.5m cables with 1A fuse, for ‘+’ connection and starter battery or midpoint connection
VE.Direct connection VE.Direct port on the unit 1.5m cable with a VE.Direct socket; a VE.Direct cable is needed to connect a GX device (not included)
Temperature sensor Optional (ASS000100000)
VE.Direct Bluetooth Smart dongle Optional (ASS030536011), for installations where metal or seawater limits Bluetooth range
Stored trends 46 days: battery voltage, current, state of charge, and auxiliary input (battery temperature, midpoint deviation or starter battery voltage)
Selection Table
Model SmartShunt 300A SmartShunt 500A SmartShunt 1000A SmartShunt 2000A SmartShunt IP65 300A SmartShunt IP65 500A SmartShunt IP65 1000A SmartShunt IP65 2000A
Rated current 300A 500A 1000A 2000A 300A 500A 1000A 2000A
Protection category IP21 IP65
Supply voltage range 6.5–70Vdc
Battery capacity 1–9,999Ah
Dimensions (h × w × d) 44 × 120 × 44mm 46 × 120 × 54mm 68 × 168 × 75mm 68 × 168 × 100mm 44 × 120 × 38mm 46 × 120 × 54mm 68 × 168 × 75mm 68 × 168 × 100mm
Downloads
Datasheet-SmartShunt-EN.pdf
Datasheet-SmartShunt-IP65-EN.pdf
Warranty & Returns

Warranty periods vary by product. Please refer to the Powerbox Warranty Policy for the applicable coverage period against manufacturing defects from date of purchase. For returns and RMA requests, please visit our RMA support page or contact our support team directly.

FAQs
Both versions share the same measurement electronics, 6.5–70Vdc supply range and accuracy, and come in 300A, 500A, 1000A and 2000A ratings. The standard SmartShunt is rated IP21 for dry installations. The SmartShunt IP65 is water resistant, comes with two 1.5m fused cables and a 1.5m cable fitted with a VE.Direct socket, and shows its alarms only in the VictronConnect app or on a GX device.
Choose a rating above the highest continuous charge or discharge current in your system. The 300A model measures 44 × 120 × 44mm (38mm deep for the IP65) with M8 shunt bolts; the 500A is 46 × 120 × 54mm, the 1000A is 68 × 168 × 75mm and the 2000A is 68 × 168 × 100mm, all with M10 bolts. Current offset is less than 10mA on the 300A and 500A, 20mA on the 1000A and 40mA on the 2000A.
The SmartShunt is an all-in-one battery monitor without a display: your phone or tablet becomes the display through the VictronConnect app, so there is no display head to mount and wire. Compared with the BMV-712, it has no programmable visual and audible alarm and no programmable relay. Choose the BMV-712 where a panel display, alarm or relay output is required.
It measures battery voltage and current and shows state of charge, time to go, consumed amp hours and history. Current measurement accuracy is ±0.4% and voltage accuracy is ±0.3%, with ±0.01A current, ±0.01V voltage, ±0.1Ah and ±0.1% state-of-charge resolution. It suits battery banks from 1 to 9,999Ah and stores 46 days of trend data.
Yes. The auxiliary input monitors one of three things: a second battery such as an engine starter battery (6.5–70Vdc), the midpoint voltage of a battery bank, or battery temperature using the optional temperature sensor ASS000100000, which measures from -20°C to +50°C with ±1°C resolution.
The SmartShunt connects over Bluetooth to the VictronConnect app on a phone or tablet. For system-level monitoring, its VE.Direct port connects to a Victron GX device such as the Cerbo GX using a VE.Direct cable. The IP65 version has a 1.5m cable with a VE.Direct socket, and a VE.Direct cable to the GX device is ordered separately.
The shunt and its cables reduce Bluetooth range to about 10–15m, which suits most installations. A metal vehicle chassis or seawater around a boat hull can reduce it further. In that case, add a VE.Direct Bluetooth Smart dongle (ASS030536011) to the system and switch off Bluetooth in the SmartShunt.
Both versions comply with EN 60335-1 (safety), EN-IEC 61000-6-1, EN-IEC 61000-6-2 and EN-IEC 61000-6-3 (emission and immunity) and EN 50498 (automotive). They operate from -40°C to +50°C on a 6.5–70Vdc supply and draw less than 1mA. For help selecting a model, contact sales@powerbox.co.nz.