Site Management and Remote Monitoring

Victron BMV-700 Series Battery Monitor

The BMV-700 series is a range of precision Victron battery monitors that work as a fuel gauge for a battery bank. Alongside voltage, current and ampere-hours consumed, each model calculates state of charge, remaining time at the present rate of discharge and power consumption in watts, so operators know how much usable capacity is left rather th...

Read More

The BMV-700 series is a range of precision Victron battery monitors that work as a fuel gauge for a battery bank. Alongside voltage, current and ampere-hours consumed, each model calculates state of charge, remaining time at the present rate of discharge and power consumption in watts, so operators know how much usable capacity is left rather than estimating it from voltage alone.

The series covers four models. The BMV-700 monitors a single battery bank. The BMV-702 and BMV-702 Black add an auxiliary input that can be programmed to measure the voltage of a second battery, battery temperature or midpoint voltage, with corresponding alarm and relay settings. The BMV-700H extends monitoring to high-voltage battery systems and suits systems with a grounded negative only, as the monitor is not isolated from the shunt.

Midpoint voltage monitoring on the BMV-702 makes a technique often used in industry to protect large, expensive battery banks available for any battery bank. A large or increasing deviation of the midpoint voltage points to improper battery care or a failed battery or cell, so an early alarm allows corrective action before the whole bank is damaged.

Installation is straightforward. All electrical connections run to the quick-connect PCB on the supplied 500A shunt, which links to the flush-mounted display with a standard RJ12 cable, so no other components are needed. Setup is guided by a quick install menu with scrolling text, or settings can be adjusted from a smartphone using the VictronConnect app and the optional VE.Direct to Bluetooth Smart dongle.

A programmable alarm and relay let each monitor act on what it measures, switching off non-critical loads or starting a generator when needed. A stored history of events helps evaluate usage patterns and battery health over time, and compliance with the ECE R10-4 and EN 50498 automotive EMC standards supports installation in vehicles.

The VE.Direct port connects every model to the wider Victron system. Up to four BMVs connect directly to a Color Control GX, more can be added through a USB hub, and the data can be stored and analysed on the VRM Portal. For series-connected batteries, Victron's Battery Balancer helps maximise service life.

Show Less

Model:
Unit Price
—
or send a quick enquiry about this product only
Features
  • Battery Fuel Gauge: Tracks voltage, current, power, ampere-hours consumed and state of charge, with a time-to-go reading at the current rate of discharge.
  • Three Models for Different System Voltages: The BMV-700 and BMV-702 operate from 6.5–95Vdc, covering 12V, 24V and 48V systems, while the BMV-700H covers 60–385Vdc battery systems.
  • Auxiliary Input (BMV-702): A programmable input measures the voltage of a second battery, battery temperature or midpoint voltage, with corresponding alarm and relay settings.
  • Midpoint Voltage Monitoring (BMV-702): Gives early warning of a failing battery or cell in a series-connected bank, so corrective action can prevent severe damage to an expensive battery.
  • High-Accuracy Current Sensing: 10mA (0.01A) resolution with ±0.4% current accuracy and ±0.3% voltage accuracy, using the included 500A/50mV shunt.
  • Extendable Shunt Range: Shunt selection capability up to 10,000A supports larger battery banks, with optional 1,000A, 2,000A and 6,000A shunts that accept the standard quick-connect PCB.
  • Programmable Alarm and Relay: Visual and audible alarm plus a 60V/1A normally open relay (invertible) can turn off non-critical loads or start a generator when needed.
  • Low Self-Consumption: Draws 4mA (2.9Ah per month) at 12V and 3mA (2.2Ah per month) at 24V, placing minimal load on the battery being monitored. These figures apply to the BMV-700 and BMV-702, not the BMV-700H.
  • Smartphone Monitoring and Setup: The optional VE.Direct to Bluetooth Smart dongle displays real-time data and alarms in the VictronConnect app on Apple and Android devices, and lets you adjust settings from your phone.
  • System Integration via VE.Direct: Up to four BMVs connect directly to a Color Control GX, with more possible through a USB hub, and data can be stored and analysed on the VRM Portal.
  • Easy Installation: All electrical connections run to the quick-connect PCB on the shunt, which links to the monitor with the included 10m RJ12 cable. A separate front bezel gives a square or round display appearance, and a securing ring and screws are included for mounting.
  • Historical Data Logging: Stores a wide range of historical events for evaluating usage patterns and battery health over time.
Specifications
GENERAL SPECIFICATIONS
Data BMV-700 BMV-702 / BMV-702 Black BMV-700H
Supply voltage range 6.5–95Vdc 6.5–95Vdc 60–385Vdc
Current draw, backlight off <4mA <4mA <4mA
Current consumption 2.9Ah per month (4mA) at 12V; 2.2Ah per month (3mA) at 24V n.a.
Input voltage range, auxiliary battery n.a. 6.5–95Vdc n.a.
Battery capacity 1–9,999Ah
Operating temperature range –40°C to +50°C (–40°F to 120°F)
Measures voltage of second battery, temperature or midpoint No Yes No
Temperature measurement range –20°C to +50°C n.a.
VE.Direct communication port Yes Yes Yes
Relay 60V / 1A normally open (function can be inverted)
Shunt selection capability Up to 10,000A
RESOLUTION & ACCURACY (with a 500A shunt)
Data BMV-700 BMV-702 / BMV-702 Black BMV-700H
Current ±0.01A
Voltage ±0.01V
Amp hours ±0.1Ah
State of charge (0–100%) ±0.1%
Time to go ±1min
Temperature (0–50°C or 30–120°F) n.a. ±1°C/°F n.a.
Accuracy of current measurement ±0.4%
Accuracy of voltage measurement ±0.3%
INSTALLATION & DIMENSIONS
Data BMV-700 BMV-702 / BMV-702 Black BMV-700H
Installation Flush mount
Front 63mm diameter
Front bezel 69 x 69mm (2.7 x 2.7 inch)
Shunt connection bolts M10 (0.3937 inch)
Body diameter and depth 52mm (2.0 inch) and 31mm (1.2 inch)
Protection category IP55 (not intended for outdoor use)
STANDARDS
Data BMV-700 BMV-702 / BMV-702 Black BMV-700H
Safety EN 60335-1
Emission / Immunity EN 55014-1 / EN 55014-2
Automotive ECE R10-4 / EN 50498
ACCESSORIES
Data BMV-700 BMV-702 / BMV-702 Black BMV-700H
Shunt (included) 500A / 50mV
Cables (included) 10m 6-core UTP cable with RJ12 connectors, and 2m battery cable with 1A slow-blow fuse for '+' connection
Mounting kit (included) Separate front bezel for a square or round display appearance, securing ring for rear mounting and screws for front mounting
Temperature sensor Optional (ASS000100000)
Optional shunts 1,000A/50mV, 2,000A/50mV and 6,000A/50mV (the quick-connect PCB on the standard 500A/50mV shunt can also be mounted on these shunts)
Bluetooth Smart dongle VE.Direct to Bluetooth Smart dongle (ordered separately)
Interface cables VE.Direct cables to connect to a Color Control GX (ASS030530xxx); VE.Direct to USB interface (ASS030530000) to connect several BMVs to a Color Control GX or computer
Selection Table
Data BMV-700 BMV-702 BMV-702 Black BMV-700H
Supply voltage range 6.5–95Vdc 6.5–95Vdc 6.5–95Vdc 60–385Vdc
Auxiliary input No Second battery voltage, temperature or midpoint Second battery voltage, temperature or midpoint No
Battery capacity 1–9,999Ah
Communication VE.Direct
Downloads
victron-bmv-700-series-battery-monitor-datasheet.pdf
victron-three-phase-ve-bus-bms-quattro-24v-lithium-system-schematic.pdf
victron-bmv-700-phoenix-inverter-system-schematic.pdf
victron-bmv-700-battery-monitor-quick-installation-guide.pdf
Warranty & Returns

Warranty periods vary by product. Please refer to the Powerbox Warranty Policy for the applicable coverage period against manufacturing defects from date of purchase. For returns and RMA requests, please visit our RMA support page or contact our support team directly.

FAQs
The BMV-700 series are precision battery monitors that track battery voltage, current, power, ampere-hours consumed and state of charge, acting as a fuel gauge and time-to-go indicator for the battery bank.
The BMV-700 monitors a single battery bank on 6.5–95Vdc systems. The BMV-702 and BMV-702 Black add an auxiliary input to measure a second battery's voltage, battery temperature or midpoint voltage. The BMV-700H covers 60–385Vdc battery systems.
A 500A/50mV quick-connect shunt, a 10m six-core UTP cable with RJ12 connectors, a 2m battery cable with a 1A slow-blow fuse, a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting. No other components are needed to install it.
The BMV-700 and BMV-702 operate from a 6.5–95Vdc supply, covering 12V, 24V and 48V battery systems. The BMV-700H operates from 60–385Vdc and is suitable for systems with a grounded negative only, as the monitor is not isolated from the shunt.
Available on the BMV-702, it measures the voltage halfway along a string of series-connected batteries or cells. A large or increasing deviation from half the total voltage points to improper battery care or a failed battery or cell, so a midpoint alarm allows corrective action before an expensive battery bank is damaged.
Only the BMV-702, using its auxiliary input with the optional temperature sensor (ASS000100000). The BMV-700 and BMV-700H do not measure temperature.
Yes. Each monitor ships with a 500A/50mV shunt, and shunt selection capability extends up to 10,000A. Optional 1,000A/50mV, 2,000A/50mV and 6,000A/50mV shunts accept the quick-connect PCB from the standard shunt.
Current is measured to a resolution of 10mA (0.01A) with ±0.4% accuracy, and voltage is measured with ±0.3% accuracy, using the included 500A shunt.
For the BMV-700 and BMV-702, current consumption is 4mA (2.9Ah per month) at 12V and 3mA (2.2Ah per month) at 24V. These figures do not apply to the BMV-700H, which operates on 60–385Vdc systems.
Yes. Its programmable relay (60V/1A, normally open, function can be inverted) can turn off non-critical loads or run a generator when needed, alongside a programmable visual and audible alarm.
Yes. With the optional VE.Direct to Bluetooth Smart dongle, real-time data and alarms can be displayed in the VictronConnect app on Apple and Android smartphones, tablets and MacBooks, and settings can be adjusted from your phone. Up to four BMVs can also connect directly to a Color Control GX, with data stored and analysed on the VRM Portal.
All models operate from –40°C to +50°C and are rated IP55, though they are not intended for outdoor use.